Asus GigaX2024X - Manual (Page 84)

GigaX Series L2 Managed Switch User’s Guide
84
vlan id [1 by default]:
port list [format: 1 2 3 4- 26/* for all ports]:
[Remove Multicast Group]
Allows user to delete a static multicast group entry from multicast group table
by given a MAC address and VLAN ID.
CLI command : l2 mcast delete
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id:
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 mcast retrieve
[IGMP is] [Enabled/Disabled]
Layer 2 IGMP snooping can be started or terminated by user if necessary.
CLI command : l2 igmp
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 igmp retrieve
[Action] [Enable/Disable]
[Mode] [Broadcast] or [Broadcast/Multicast] or
[Broadcast/Multicast/Unknown unicast]
[Limit Rate]
User can limit the broadcast, multicast, and flooding (due to destination lookup
failed) traffic rate by turning the traffic control on.