Asus GigaX2024X - Manual (Page 64)

GigaX Series L2 Managed Switch User’s Guide
• Multi-host: If enabled, all hosts connected to the selected port are allowed
to use the port if one of the hosts passed the authentication. If disabled,
only one host among other hosts passed the authentication is allowed to
use the port.
• Authentication Control: If 'force authorized' is selected, the selected port is
forced to be authorized. Thus, traffic from all hosts is allowed to pass.
Otherwise, if 'force unauthorized' is selected, the selected port is blocked
and no traffic can go through. If 'Auto' is selected, the behavior of the
selected port is controlled by 802.1x protocol. All ports should be set to
'Auto' under normal conditions.
• Guest VLAN: Specify a guest VLAN to clients that are not 802.1x-capable.
Click to make the settings effective permanently. Click
to refresh the settings to current value.
Figure 35. ort Access Control P
64