Asus GigaX2024X - Manual (Page 83)

GigaX Series L2 Managed Switch User Guide
83
CLI command : l2 port lacppri
[Reload]
Restores the previous saved settings of trunk from configuration file.
CLI command : l2 trunk retrieve
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command : l2 mirror create
CLI command : l2 mirror ingress
CLI command : l2 mirror egress
CLI command : l2 mirror remove
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 mirror retrieve
[Show Multicast Group]
Displays the static multicast groups that are presented in the multicast
group table.
CLI command: l2 mcast show
[Set Multicast Group]
Allows user to add or modify a static multicast group by specifying the MAC
address, VLAN ID, , VLAN port members, and its untagged port members.
Note that MAC address and VLAN ID combination is formed as an unique
entry in multicast group table
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]: