Show trunk, Create trunk, Add/remove trunk – Asus GigaX2024X User Manual
Page 82: Lacp action, Lacp system priority, Lacp port priority
GigaX Series L2 Managed Switch User’s Guide
82
CLI command : l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command : l2 trunk show
[Create Trunk]
Creates a new trunk group by giving trunk ID, rtag, name, LACP mode and
port numbers.
CLI command : l2 trunk create
[Add/Remove Trunk]
Trunk group port members can be added to or removed from an existing trunk
group.
CLI command : l2 trunk add
CLI command : l2 trunk remove
[LACP Action]
User can enable or disable LACP on a specific trunk group.
CLI command : l2 trunk lacp action
[LACP System Priority]
User can assign the system priority for running LACP.
CLI command : l2 trunk lacp syspri
[LACP Port Priority]
User can assign the port priority for running LACP.