Vlan id, Dhcp client, Figure 44 – Asus GigaX2024X User Manual

Page 78: Sys commands

Text mode
Original mode

GigaX Series L2 Managed Switch User’s Guide

Figure 44. SYS commands

[VLAN ID]

Display the VLAN ID for the switch. It is necessary to be within the same VLAN
for management .

CLI command: net interface vlan sw0

[

DHCP Client

]

Enable DHCP to get a dynamic IP address, or disable DHCP to specify a
static IP address. If you enable DHCP, you can renew or release the IP
address for the switch, and use show command to display the dynamic IP
address.

CLI command: net interface dhcp sw0 show>[IP Address]

Displays the static IP address for the switch. This IP address is used for
manageable purpose, i.e.; network applications such as, http server, SNMP
server, ftp server, telnet server and SSH server of the switch are all using this
IP address.

CLI command: net interface ip sw0 < IP address>