Asus GigaX2024X - Manual (Page 50)

GigaX Series L2 Managed Switch User’s Guide
If one untagged port belongs to two or more VLAN groups at the same time, it
will confuse the switch and cause flooding traffics. To prevent it, the switch only
allows one untagged port belongs to one VLAN at the same time. That is, the
untagged port belongs to the VLAN group which is called “PVID” and
configured in the “Default Port VLAN & CoS” page. If you want to assign an
untagged port from one VLAN to another, you have to remove it from the
original VLAN, or change it to be tagged in the original VLAN first.
Show VLAN: select the existed VLAN to display or select “Add a new
VLAN” to create a new VLAN group
Name: the VLAN name
VLAN ID: this field requires user to enter the VLAN ID when a new VLAN
is created
Remove VLAN: Remove a existed VLAN. This field disappears in VLAN
creation page.
Click on to save the configuration. To make the configuration
effective, go to “Save Configuration” page, then click on .
50