Asus P8P67 WS Revolution - Manual (Page 138)

4-20 Chapter 4: Software support
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard disk
drives when you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select 2. Delete RAID Volume and press
. The following screen appears:
Exiting the Intel ® Rapid Storage Technology Option ROM utility
To exit the utility:
1.
From the utility main menu, select 5. Exit, and then press . The
following warning message appears:
2. Press to exit or press to return to the utility main menu.
2. Use the up/down arrow key to select the RAID set you want to delete, and
then press . The following warning message appears:
3. Press to delete the RAID set and return to the utility main menu, or press
to return to the
DELETE VOLUME menu.
Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ DELETE VOLUME MENU ]
[ HELP ]
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume
Name Level Drives Capacity Status Bootable
Volume0 RAID0(Stripe) 2 298.0GB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete volume “Volume0”? (Y/N):
[ DELETE VOLUME VERIFICATION ]
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]