Asus ESC4000 G2 - Manual (Page 100)

5-26 Chapter 5: BIOS setup
Enable/Disable USB (EHCI)
support
EHCI Controller 1 [Enabled]
EHCI Controller 2 [Enabled]
USB Port 1 [Enabled]
USB Port 2 [Enabled]
USB Port 3 [Enabled]
USB Port 4 [Enabled]
USB Port 5 [Enabled]
USB Port 6 [Enabled]
USB Port 7 [Enabled]
USB Port 8 [Enabled]
USB Port 9 [Enabled]
USB Port 10 [Enabled]
USB Port 11 [Enabled]
USB Port 12 [Enabled]
USB Port 13 [Enabled]
USB Port 14 [Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
USB Ports Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
EHCI Controller 1/2 [Enabled]
Allows you to enable or disable the EHCI controllers.
Configuration options: [Disabled] [Enabled]
USB Port 1~14 [Enabled]
Allows you to enable or disable USB port items.
Configuration options: [Disabled] [Enabled]
5.4.9 Trusted Computing
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Configuration
TPM SUPPORT [Enabled]
Pending operation [None]
Current Status Information
TPM Enabled Status: [Disabled]
TPM Active Status: [Deactivated]
TPM Owner Status: [UnOwned]
TPM Support [Enabled]
Allows you to enable or disable the TPM support.
Configuration options: [Disabled] [Enabled]
Pending operation [None]
Configuration options: [None] [Enable Take Owership] [Disable Take Ownership]
[TPM Clear]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced