beautypg.com

2 installing the cover – Asus RS161-E5/PA2 User Manual

Page 21

background image

2-3

ASUS RS161-E5/PA2

2.1.2

Installing the cover

1. Position the cover on top of the chassis with the thumbscrews on the rear,

and leaving a gap of about half an inch from the front panel.

2. Make sure that the pegs inside the cover (two on each side) are aligned to

the grooves on the chassis.

3. Slide the cover toward the front until it snaps in place.
4. Tighten the thumbscrews on the rear to secure the cover.

Grooves

Peg inside

Thumbscrews

See also other documents in the category Asus Computer hardware: