Asus RX3041H - Manual (Page 95)

RX3041H User’s Manual Chapter 9. Configuring Firewall/NAT Settings
81
2. Associate the NAT pool to an outbound ACL rule by selecting “NAT Pool” from the NAT type
drop-down list and then choose an existing NAT pool from the NAT pool drop-down list.
Figure 9.33. NAT Pool Example – Associate a NAT Pool to an ACL Rule
9.8.4 Configuring Time Range
With this option you can configure access time range records for eventual association with ACL rules. ACL
rules associated with a time range record will be active only during the scheduled period. If the ACL rule
denies HTTP access during 10:00hrs to 18:00hrs, then before 10:00hrs and after 18:00hrs the HTTP traffic will
be permitted to pass through. One time range record can contain up to three time periods. For example:
Office hours on weekdays (Mon-Fri) can have the following periods:
Pre-lunch period between 9:00 and 13:00 Hrs
Post-lunch period between 14:00 and 18:30 Hrs
Office hours on weekends (Saturday-Sunday) can have the following periods:
9:00 to 12:00 Hrs
Such varying time periods can be configured into a single time range record. Access rules can be activated
based on these time periods.
9.8.4.1 Time Range Configuration Parameters
Table 9.9 describes the configuration parameters available for a time range.
Table 9.9. Time Range Configuration Parameters
Field Description
Time Range drop-
down list Select "Add New Time Range" to add a new time range or select an existing
time range from the drop-down list.
Time Range Name Enter a name for the Time Range.
Schedule drop-down
list Select "Add New Schedule" to add a new schedule or select an existing
schedule from the drop-down list.
Days of Week Set the days for the schedule.
Time (hh:mm) Set the time windows for the schedule in hh:mm format.
NAT pool drop-down list
NAT type drop-down list