Asus RX3041H User Manual
Page 85
RX3041H User’s Manual
Chapter 9. Configuring Firewall/NAT Settings
71
9.8.1.2.1 FTP Example: Add a FTP Filter Rule to Block FTP DELETE Command
10.64.2.0
ISR
Private Network 192.168.1.0/24
FTP Server
10.64.2.254
Inside FW
Outside FW
Figure 9.18 Network Diagram for FTP Filter Example – Blocking FTP Delete Command
1. Open the Application Filer configuration page by clicking the Firewall
Î Policy List Î Application Filter menu.
2. Select FTP from the Filter Type drop-down list.
3. Select “Add New Filter” from the Filter Rule drop-down list.
4. Enter a name for this rule – in this example, FTPRule1.
5. Change the port number if necessary. However, it is recommended
that you keep the “Default” setting.
Filter Type drop-down list
Filter Rule drop-
down list
Figure 9.19. FTP Filter Example – Configuring FTP Filter Rule
6. Choose to enable to disable the logging option. The default setting is to keep the logging for this
rule disabled.
7. Click on the first FTP commands field, a Firewall Configuration Assistant page is displayed.