Asus RX3041H - Manual (Page 58)

Chapter 7. Configuring Routes RX3041H User’s Manual
44
1. In the Static Routes configuration page (as shown in Figure 7.2), select the route from the service
drop-down list or click on the icon of the route to be deleted in the Routing Table.
2. Click to delete the selected route.
WARNING
Do not remove the route for default gateway unless you know
what you are doing. Removing the default route will render the
Internet unreachable.
7.3.4 Viewing the Routing Table
All IP-enabled computers and routers maintain a table of IP addresses that are commonly accessed by their
users. For each of these destination IP addresses, the table lists the IP address of the first hop the data should
take. This table is known as the device’s routing table.
To view the RX3041H’s routing table, just open the Routing configuration page by clicking on the Routing
menu. The Routing Table displays at the bottom half of the Routing configuration page, as shown in Figure 7.3.
Figure 7.3. Routing Table
The routing table displays a row for each existing route containing the IP address and the subnet mask of the
destination network and the IP address of the gateway that forwards the traffic to the destination network.