Asus RX3041H - Manual (Page 26)

Chapter 3. Quick Start Guide RX3041H User’s Manual
12
7. If prompted, click button to restart your computer with the new settings.
Next, configure the PCs to accept IP addresses assigned by the RX3041H:
8. In the Control Panel, double-click the Network and Dial-up Connections icon.
9. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and
then select Properties.
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then
click button.
11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an
IP address automatically. Also click the radio button labeled Obtain DNS server address
automatically.
12. Click button twice to confirm and save your changes, and then close the Control Panel.
3.2.4 Windows® 95, 98, and Me PCs
1. In the Windows task bar, click the button, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
In the Network dialog box, look for an entry started w/ “TCP/IP ->” and the name of your network
adapter, and then click button. You may have to scroll down the list to find this entry.
If the list includes such an entry, then the TCP/IP protocol has already been enabled. Skip to step 8.
3. If Internet Protocol (TCP/IP) does not display as an installed component, click button.
4. In the Select Network Component Type dialog box, select Protocol, and then click button.
5. Select Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list,
box and then click button.
You may be prompted to install files from your Windows 95, 98 or Me installation CD or other media.
Follow the instructions to install the files.
6. If prompted, click button to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the RX3041H:
7. In the Control Panel, double-click the Network icon.
8. In the Network dialog box, select an entry started with “TCP/IP ->” and the name of your network
adapter, and then click button.
9. In the TCP/IP Properties dialog box, click the radio button labeled Obtain an IP address
automatically.
10. In the TCP/IP Properties dialog box, click the “Default Gateway” tab. Enter 192.168.1.1 (the
default LAN port IP address of the RX3041H) in the “New gateway” address field and click
button to add the default gateway entry.
11. Click button twice to confirm and save your changes, and then close the Control Panel.
12. If prompted to restart your computer, click button to do so with the new settings.
3.2.5 Windows® NT 4.0 workstations:
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the button, point to Settings, and then click Control
Panel.