Asus RX3041H - Manual (Page 112)

Chapter 11. System Management RX3041H User’s Manual
98
Figure 11.6. Date and Time Configuration Page
5. Click on button to save the settings.
11.4.3 View the System Date and Time
To view the system date and time, open the Date/Time configuration page by clicking the System
Management
Î Date/Time menu.
11.5 SNMP Setup
SNMP (Simple Network Management Protocol) as its name suggests is used for network management. You
may use the SNMP configuration page to enable or disable the SNMP support.
11.5.1 SNMP Configuration Parameters
Table 11.3 describes the configuration parameters available for SNMP setup.
Table 11.3. Fixed DHCP Lease Configuration Parameters
Field Description
SNMP
Click on the “Enable” or “Disable” radio button to enable or disable the SNMP
support.
RO Community Name
Community string is a clear text string that is used as password between the
SNMP management station and the RX3041H. This “Read Only” community
name is used by the SNMP management station to read the settings in the
RX3041H.
RW Community Name
Community string is a clear text string that is used as password between the
SNMP management station and the RX3041H. This “Read and Write”
community name is used by the SNMP management station to read and
configure the settings in the RX3041H.
Trap Address
Trap message is sent by the RX3041H to tell the SNMP management station
that something has happened on the RX3041H. This field is used to enter the
IP address of the SNMP management station that is supposed to receive trap
messages from the RX3041H.