Asus P5Q SE2 - Manual (Page 53)

ASUS P5Q SE2 2-15
READ to READ Delay (D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
WRITE to WRITE Delay (S) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
WRITE to WRITE Delay (D) [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
3rd Information: 13-5-1-5-5
WRITE to PRE Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [31 DRAM Clocks]
READ to PRE Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
PRE to PRE Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [3 DRAM Clocks]
ALL PRE to ACT Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
ALL PRE to REF Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] ~ [15 DRAM Clocks]
DRAM.Static.Read.Control.[Auto]
Adjusting this item might enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM.Read.Training.[Auto]
Adjusting this item might enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
MEM..OC.Charger.[Auto]
Adjusting this item might enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
Ai.Clock.Twister.[Auto]
Allows you to set the DRAM performance. Set this item to [Light] or [Lighter] to enhance
DRAM compatibility, or [Strong] or [Stronger] to accelerate DRAM performance.
Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger]
Ai.Transaction.Booster.[Auto]
Allows you to set the system performance. Configuration options: [Auto] [Manual]
The following items appear only when you set the Ai.Transaction.Booster item to
[Manual].
C/P: A1 A2 A3 A4
LVL: 09 09 09 09
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value.
Pull-In of CHA/B PH1/2/3/4 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase
1 to 4. The number of phases is determined by DRAM frequency and FSB strap.
Configuration options: [Disabled] [Enabled]