Asus P5Q SE2 - Manual (Page 41)

ASUS P5Q SE2 2-3
2.1.2 Creating a bootable floppy disk
1. To create a bootable floppy disk:
DOS environment
a. Insert a 1.44MB floppy disk into the floppy disk drive.
b. At the DOS prompt, key in format A:/S then press .
Windows ® XP environment
a. Insert a 1.44MB floppy disk into the floppy disk drive.
b. Click Start from the Windows ® desktop, then select My.Computer.
c. Right-click the 3 1/2 Floppy Drive icon, then select Format.
d. Select the Create.an.MS-DOS.startup.disk.checkbox.
e. Click Start.
Windows ® Vista environment
a. Insert a formatted, high density 1.44MB floppy disk into the floppy disk
drive.
b. Click from the Windows ® desktop, then select Computer.
c. Right-click Floppy.Disk.Drive then click Format to display the
Format 3 1/2 Floppy dialog box.
d. Select the Create.an.MS-DOS.startup.disk checkbox.
e. Click Start.
2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
2.1.3. ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through
the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2
utility is built in the BIOS chip so it is accessible by pressing .+. during the
Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
2. Save the BIOS file to a floppy disk or USB flash disk, then restart the system.
3. Launch EZ Flash 2 using either of the following methods.
(1) Insert the floppy disk or USB flash disk that contains the BIOS file into the floppy
disk drive or a USB port.
Press .+. during POST to display the following.