Asus P5Q SE2 - Manual (Page 29)

ASUS P5Q SE2 1-19
• The USB device wake-up feature requires a power supply that can provide 500mA on
the +5VSB lead for each USB port; otherwise, the system would not power up.
• The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
1.10. Connectors
1.10.1. Rear.panel.connectors
3 4 5 6 2
7 8 12 10 9 11 13
1
1.. PS/2.mouse.port.(green)..This port is for a PS/2 mouse.
2.. LAN.(RJ-45).port. Supported by Gigabit LAN controller, this port allows Gigabit
connection to a Local Area Network (LAN) through a network hub. Refer to the table
below for the LAN port LED indications.
LAN.port.LED.indications
ACT/LINK.LED SPEED.LED
Status Description Status Description
OFF No link OFF 10 Mbps connection
YELLOW Linked ORANGE 100 Mbps connection
BLINKING Data activity GREEN 1 Gbps connection
SPEED
LED
ACT/LINK
LED
LAN port
3.. Center/Subwoofer.port.(orange). This port connects the center/subwoofer speakers.
4. Rear.Speaker.Out.port.(black). This port connects the rear speakers in a 4-channel,
6-channel, or 8-channel audio configuration.
5.. Line.In.port.(light.blue). This port connects the tape, CD, DVD player, or other audio
sources.
6.. Line.Out.port.(lime). This port connects a headphone or a speaker. In 4-channel, 6-
channel, and 8-channel configuration, the function of this port becomes Front Speaker
Out.
7.. Microphone.port.(pink). This port connects a microphone.
8.. Side.Speaker.Out.port.(gray). This port connects the side speakers in an 8-channel
audio configuration.
Refer to the audio configuration table on the next page for the function of the audio ports in
2, 4, 6, or 8-channel configuration.