Asus P5Q SE2 - Manual (Page 32)

1-22 Chapter 1: Product introduction
4.. Serial.ATA.connectors.(7-pin.SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
SATA1
GN
D
RSATA_RXN1 RSATA_RXP1 GN
D
RSATA_TXN1 RSATA_TXP1 GN
D
SATA3
GN
D
RSATA_RXN3 RSATA_RXP3 GN
D
RSATA_TXN3 RSATA_TXP3 GN
D
SATA5
GN
D
RSATA_RXN5 RSATA_RXP5 GN
D
RSATA_TXN5 RSATA_TXP5 GN
D
SATA2
GN
D
RSATA_TXN2 RSATA_TXP2
GN
D
RSATA_RXN2 RSATA_RXP2
GN
D
SATA4
GN
D
RSATA_TXN4 RSATA_TXP4
GN
D
RSATA_RXN4 RSATA_RXP4
GN
D
SATA6
GN
D
RSATA_TXN6 RSATA_TXP6
GN
D
RSATA_RXN6 RSATA_RXP6
GN
D
P5Q SE2
P5Q SE2 SATA connectors (ICH10R ® )
Connect the right-angle side of SATA
signal cable to SATA device. Or you
may connect the right-angle side of
SATA cable to the onboard SATA
port to avoid mechanical conflict with
huge graphics cards.
right.angle.side
5.. CPU,.chassis,.and.power.fan.connectors.
(4-pin.CPU_FAN,.3-pin.CHA_FAN,.3-pin.PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total
of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, ensuring that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
PWR_FAN
Rotation
+12V
GND
CHA_FAN
GND
+12V
Rotation
P5Q SE2
P5Q SE2 fan connectors
Only the CPU fan supports the ASUS Q-FAN feature.