GE Industrial Solutions FNW700R Series - Manual

Data Sheet
October 24, 2011
FNW700R Series Power Modules; DC-DC Converters
36-75Vdc Input; 28Vdc, 700W Output
§ This product is intended for integration into end use equipment only
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS07-003 ver 1.48
PDF name: FNW700R.pdf
:
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 High power density: 127 W/in 3
 Industry standard pin-out
 Low output ripple and noise
 Industry standard Full brick footprint
116.6mm x 60.7mm x 12.7mm
(4.6” x 2.4” x 0.5”)
 Remote Sense
 2:1 input voltage range
 Single tightly regulated main output
 Constant switching frequency
 Latch after fault shutdown
 Over temperature protection auto restart
 Loosely regulated auxiliary output
 Power good signal
 Output voltage adjustment trim (+10%/-40%)
 Wide operating case temperature range (-40°C to
100°C)
 CE mark meets 73/23/EEC and 93/68/EEC
directives
§
 UL60950-1/CSA † C22.2 No. 60950-1-03 Certified
(
C
CSA
US
) and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 RF Power Amplifier
 Wireless Networks
 Switching Networks
Options
 Output OCP/OVP auto restart
 Shorter pins
 Unthreaded heatsink holes
Description
The FNW700R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
700W output power in an industry standard full size brick footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections