GE Industrial Solutions Austin Minilynx 12V SIP - Manual

Data Sheet
October 2, 2009
Austin Minilynx TM 12V SIP Non-isolated Power Modules:
8.3 – 14Vdc Input; 0.75Vdc to 5.5 Vdc Output; 3A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-041 ver. 1.32
PDF name: minilynx_sip_12v_ds.pdf
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Delivers up to 3A output current
ƒ High efficiency – 91% at 3.3V full load (V
IN
= 12.0V)
ƒ Small size and low profile:
22.9 mm x 10.2 mm x 6.63 mm
(0.90 in x 0.4in x 0.261 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 10.8M hours at 25 o C Full-load
ƒ Constant switching frequency (300 kHz)
ƒ Output voltage programmable from 0.75 Vdc to 5.5
Vdc via external resistor
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA † C22.2 No.
60950-1-03 Certified, and VDE ‡ 0805:2001-12
(EN60950-1) Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin MiniLynx TM 12V SIP (single-inline) power modules are non-isolated DC-DC converters that can deliver up to
3A of output current with full load efficiency of 91% at 3.3V output. These modules provide precisely regulated
output voltage programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input voltage (V
IN
=
8.3 - 14V). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient
solutions. In addition to sequencing, standard features include remote On/Off, programmable output voltage and
over current protection.
RoHS Compliant