GE Industrial Solutions AF-650 GP Top & Bottom Cover Duct Kit - Manual (Page 7)

177R0110 July 15, 2009 DET-703, Page 7
Install the gasket on the bottom cover
plate. See Figure 11.
Figure 11. Bottom cover with gasket
Install the bottom cover plate as shown in
Figure 12.
A drain hose may be attached to the drain
plug if there is concern that condensation
may accumulate in the bottom of the duct.
If not, plug the drain plug with a screw
provided with the kit. It is recommended
that Teflon tape be used with the screw to
seal the drain plug.
Figure 12. Bottom air inlet cover installed
177R0110 February 25, 2010 DET-703a, Page 7 177R0110 March 15, 2010 DET-703b, Page 7