GE Industrial Solutions Austin Minilynx 12V SMT - Manual

Data Sheet
September 10, 2013
Austin Minilynx TM 12V SMT Non-isolated Power Modules:
8.3 – 14Vdc input; 0.75Vdc to 5.5 Vdc Output; 3A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-027 ver. 1.02
PDF name: minilynx_12v_smt_ds.pdf
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Delivers up to 3A output current
 High efficiency – 91% at 3.3V full load (V
IN
= 12.0V)
 Small size and low profile:
20.3 mm x 11.4 mm x 7.27 mm
(0.80 in x 0.45 in x 0.286 in)
 Low output ripple and noise
 Constant switching frequency (300 kHz)
 Output voltage programmable from 0.75 Vdc to 5.5
Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSA † C22.2 No. 60950-1-
03 Certified, and VDE ‡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
Description
Austin MiniLynx TM 12V SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 3A of output current with full load efficiency of 91% at 3.3V output. These modules provide precisely
regulated output voltage programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input
voltage (V
IN
= 8.3 - 14V). Their open-frame construction and small footprint enable designers to develop cost- and
space-efficient solutions. In addition to sequencing, standard features include remote On/Off, programmable output
voltage and over current protection.
RoHS Compliant