Mustang Motorcycle Seats Mustang Motorcycle Jaunt Bag, No Studs - Manual

Jaunt Bag
13321
Studded
13317
No Studs
Parts Included:
1 Jaunt Bag
1 Mounting Pad with Zipper
1 Rain Cover
2 Adjustable Straps
2 8" x 1" Hook and Loop Straps
1 Y-Strap
1 Installation Instructions
In order to protect you and others from possible injury and/or property damage or loss,
please carefully read all instructions, warnings and attention notes regarding the use
and care of this product.
ATTENTION: IGNORING WARNING NOTES DESCRIBED HEREIN CAN RESULT IN POTENTIAL
DEATH, SERIOUS INJURY OR MATERIAL DAMAGE AND MAY NEGATIVELY AFFECT
PRODUCT PERFORMANCE AND FUNCTIONALITY.
Strictly observe the following guidelines in order to use the product properly
and avoid potentially dangerous accidents.
CAUTION! Never exceed the manufacturer’s recommended load capacity. Excess loading
on the luggage rack could cause damage to your motorcycle, loss or injury. Mustang is not
responsible for damage, loss or injury caused by exceeding the manufacturer’s load capacity.
ATTENTION! Secure all straps away from visible painted surfaces, moving parts,
pinch points or extreme heat.
STEP 1 Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface; turn off the ignition and allow the engine
to cool.
SUGGESTIONS FOR MOUNTING
STEP 2 This bag can be mounted in many different ways. As you can see in PIC 1 & 2,
it is on a rack with the lid opening up and forward. It is being fastened by running
the strap with the steel hooks forward under the backrest pad. The small strap is
running under the rack. The D rings give you extra ways (using bungee cords)
to further secure the bag to your bike.
- Continued -