beautypg.com

Mustang Motorcycle Seats Studded Fender Bib - Yamaha Road Star User Manual

Mustang Motorcycle Seats For motorcycles

background image

These steps are guidelines to help you install your new Mustang product. If you need further
assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an
e-mail to [email protected] or visit our website at www.mustangseats.com.


For care and maintenance of our seats, please go to our website under "Support".

Ref. part #’s 78072, 78073

Mounting Suggestions

Yamaha Road Star 1600 & 1700

Fender Bib

Tools Required:

• Phillips Screwdriver

Hardware:

• Stock Fender Screw

Mounting of Mustang Fender Bib

1. Remove seat.

2. Secure rear of bib with stock fender screw.

3. Secure front of bib with stock fender screw or under rear tab of Mustang solo.

4. Reinstall solo.

NOTE: Mustang recommends removal of fender bib before reinstalling rear seat.

Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or
other problems.

Enjoy the custom look of your new Mustang Fender Bib!

Studded Fender Bib

Plain Fender Bib