beautypg.com

Mustang Motorcycle Seats Studded Tank Bib - Kawasaki Vulcan 800 & 800 Classic User Manual

Mustang Motorcycle Seats For motorcycles

background image

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.

For care and maintenance of our seats, please go to our website under "Support".

Ref part #93117, 93118

Mounting Suggestions for the Kawasaki
Vulcan 800 1995-2005 and Vulcan Classic
1996-2005 Tank Bib

Tools Required:

• Metric Sockets
• Metric Allen Wrenches

Hardware:

• N/A

Plain Tank Bib

Mounting of Mustang Tank Bib

1. Remove three dash mounting bolts.

2. Lift dash and position square hole in bib around lower dash mount. NOTE: Tank collar must

remain on dash. Bib goes under the collar and chrome dash.

3. Secure dash with stock mounting bolts.

4. Remove seat.

5. Remove rear tank bolt.

6. Remove collar insert.

7. Align bottom hole of bib with rear tank mount.

8. Push collar insert through bib into tank mount.

9. Secure with stock rear tank bolt.

10. Reinstall seat.

Enjoy the custom look of your Mustang Tank Bib!

Studded Tank Bib