Mustang Motorcycle Seats Heated Touring Seat, Studded, Harley-Davidson FLHR, FLHX, FLHT, FLHTR User Manual

Mustang Motorcycle Seats For motorcycles

Installation Instructions

Heated Touring One-Piece

HD FL touring models

Step 1

Remove the stock seat from the motorcy-

cle.

Step 2

Locate the accessory receptacle,

part #72164-94, usually found in front of the bat-

tery as shown. If this unit is already in use, a dual-

port accessory receptacle, part #70264-94A, must

be installed before proceeding with the Mustang

seat installation.

Step 3

Remove the rubber cap from the acces-

sory receptacle. Make sure that the receptacle is

clean and free of any dirt or debris.

If dirty, be sure to clean it before attaching heating

plug from Mustang seat.

Step 4

Prepare seat for installation. Make sure

that the plug for the heating element is clean

and free of any packing material. Check to see

that the electrical wire is free of kinks or sharp

folds. Check both switches for ease of opera-

tion; center position is off; top position is high;

bottom position is low.

1997-2013

See also other documents in the category Mustang Motorcycle Seats For motorcycles: