Mustang Motorcycle Seats One-Piece Studded Original Seat - Harley-Davidson XL Sportster User Manual
Mustang Motorcycle Seats For motorcycles
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website at
For care and maintenance of our seats, please go to our website under
Refers to part number: 75609, 75153, 75091, 75325, 75738, 75730
Mounting Suggestions:
Harley-Davidson® Sportster 1958-78
One-Piece Seat
Tools Required:
• SAE Sockets or Wrenches
Hardware:
• Seat Bolt x1 (Included)
Baseplate Features:
The one-piece, 16 gauge steel baseplate is black epoxy
powder coated. Carpet protects fender paint. Polyurethane
bumpers are strategically located to prevent the baseplate
from touching the frame and fender and to minimize
vibration. The exposed brackets are bright chrome plated.
Stock Seat Removal Steps
1. Remove the rear fender screw.
2. Pull seat back to remove and lift up.
Mounting of Mustang Seat
1. Engage nose bracket under the stock frame location.
2. Tighten nose bracket bolt.
3. Put the supplied bolt up through the stock fender slot.
4. The seat is spring loaded so it will be approximately 1" off the fender when the nose tab is
engaged. Push down on seat to bolt rear down to complete the installation process.
Enjoy the Comfort of your new Mustang Seat!
Updated 10/11/10 AA