Mustang Motorcycle Seats Deluxe Tripper Solo Seat for 4.5 gallon tank - Harley-Davidson XL Sportster - Manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance please call
us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to
[email protected]
or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Refers to part number: 79427, 79429, 79437, 79439, 76157, 76159, 76148, 76150, 76151, 76153, 76568, 76570, 75540, 75541, 76154, 76156
Mounting Suggestions
Harley-Davidson® Sportster 2004 - 2013
Solo Seat
Tools Required:
• Phillips Screwdriver
• Allen Wrench Set
Hardware:
• Stock 1/4-20 Rear Fender Screw
• Fender Nut Kit (Included
Baseplate Features:
The baseplate is made of marine-grade fiberglass,
3/16" thick, finished in high gloss gel coat. Polyurethane
rubber bumpers prevent it from touching the frame and
fender and minimize vibration.
Stock Seat Removal Steps
1. Remove the rear fender screw and set aside. The stock
rear fender screw will be used to attach your new
Mustang Solo Seat.
2. Lift back of seat up about 1" then push seat forward until
the slotted center of the seat releases from the frame's
shoulder bolt. (Fig. I)
Fig. I
Mounting of Mustang Seat
1. Install supplied fender nut kit into the hole
i
n
(or "on top of")
of the fender.
2. Engage nose bracket into the frame at the base of the fuel
tank, just like the stock seat. (Fig. II)
3. Secure the back of the solo seat to the fender with stock
fender screw to complete the installation process. (Fig. III)
Fig. II
Enjoy the Comfort of your new Mustang Seat!
Fig. III