beautypg.com

Mustang Motorcycle Seats FENDER BIB YAM STRYKER STUD User Manual

Mustang Motorcycle Seats For motorcycles

background image

Installation Instructions for Mustang

Fender Bib

on 2011 Yamaha Stryker

These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to

[email protected]

or visit our website

at

www.mustangseats.com.

For care and maintenance of our seats, please go to our website under

"Support".


Ref. part #’s 78140, 78141

1. Remove center mounting bracket and U-bracket

from rear fender.







2. Install Mustang’s solo seat mounting bracket as

shown, leaving the two button head screws loose.








3. Align the two holes at the back end of the bib with

the holes in the rear fender and insert two sup-
plied button head screws. Tighten.


4. Pull bib forward under front bracket for a snug fit,

then tighten the two screws to secure bracket and
bib to fender.


5. Enjoy the custom look of your new Mustang

fender bib.