Mustang Motorcycle Seats Mustang Throw-Over Saddlebags, No Studs - Manual

Expandable Throw-Over
Saddlebags
(Fits Most Models)
13322
Studded
13318
No Studs
Parts Included:
1 Right Saddlebag, 1 Left Saddlebag
4 Adjustable Straps with Hooks
1 Installation Instructions
2 Rain Covers
2 Hook and Loop Straps
1 Cable Lock
In order to protect you and others from possible injury and/or property damage or loss,
please carefully read all instructions, warnings and attention notes regarding the use
and care of this product.
ATTENTION: IGNORING WARNING NOTES DESCRIBED HEREIN CAN RESULT IN POTENTIAL
DEATH, SERIOUS INJURY OR MATERIAL DAMAGE AND MAY NEGATIVELY AFFECT
PRODUCT PERFORMANCE AND FUNCTIONALITY.
CAUTION: The saddlebags have heat-resistant shields but we do not recommend
placing the bags near exhaust pipes. Be sure to maintain proper clearance away from
exhaust pipes.
Strictly observe the following guidelines in order to use the product properly
and avoid potentially dangerous accidents.
- Continued -
RETRACTABLE CABLE LOCK
STEP 1 See PIC. 5. To select a new combination for the lock,
press button “A” and hold down. Push the cable end (labeled
as “B”) down/inward until you hear it click.
STEP 2 Choose your new combination by turning the three
tumblers (labeled as “C”) to a three-digit combination that you
will remember. Then pull back up on the cable end to set your
combination.
STEP 3 Press down the “A” button to pull the cable end out. Plug the cable end into the
cable lock receptacle (labeled as “D”) until you hear it click into the locked position. If you
have too much slack in the cable, press the “A” button to recoil the slack amount of cable.
Turn tumblers to a position that is NOT your chosen combination to lock the mechanism.
STEP 4 To unlock, turn the tumblers to your chosen combination and press
the “E” button to release the cable and the “A” button to recoil the cable.
PIC. 5