beautypg.com

Mustang Motorcycle Seats Studded Fender Bib - Yamaha V-Star 650 User Manual

Mustang Motorcycle Seats For motorcycles

background image

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.


For care and maintenance of our seats, please go to our website under "Support".

Ref part #78077, 78078

Mounting Suggestions
Yamaha V-Star 650 Custom 1998-2009 &
V-Star 1100

Custom 2000-2011 Fender Bib

Tools Required:

• Phillips Screwdriver

Hardware:

• Stock Rear Fender Screw

Mounting of Mustang Fender Bib

1. Remove seat.

2. Attach fender bib using two stock screws in fender at front end and single screw at rear end of bib.

3. Install Solo. NOTE: Mustang recommends removal of fender bib before reinstalling rear seat.

Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or
other problems.

Enjoy the custom look of your new Mustang Fender Bib!

Studded Fender Bib

Plain Fender Bib