Mustang Motorcycle Seats Deluxe Tripper Solo Seat - Harley-Davidson Dyna Glide - Manual

Installation Instructions:
2006-2013 Dyna
Two-Piece Seats
A. Baseplate Features
Two-piece baseplates are constructed of marine-grade
fiberglass. Front seat engages at nose and with a single
screw at the rear. Rear seat is slotted and engages onto
the supplied spool washer behind the front seat and a single
screw at the rear.
B. Removal of Stock Seat
1. Remove rear fender screw.
2. Lift seat up and pull back to remove it from the bike.
3. If a passenger hand strap is present, it must be removed
before installing the Mustang seat.
C. Installation of Mustang Seat
Front seat
1. Engage nose of front seat into receiver on bike frame.
2. Align rear tab with threaded insert in fender and secure
seat with 1/4-20 screw.