Mustang Motorcycle Seats Vintage Contoured Sissy Bar Pad, 12" x 9, No Studs, No Conchos" User Manual

Mustang Motorcycle Seats For motorcycles

Mounting Suggestions

Victory Vegas, Kingpin, & 8-Ball 2003-2008

Sissy Bar Pad

Tools Required:

• 4 mm Allen Wrench
• 7/16” Socket
• 5/32” Allen Wrench
• Torque Wrench

Hardware:

• Four Sissy Bar Bolts and washers

(Included)

Step 1

Step 2

Mounting of Mustang Sissy Bar Pad

1. Remove seats mounting bracket from baseplate with 7/16"

socket. Now remove the 2 screws at the back of seat with a 5/32"
Allen wrench.

2. Insert sissy bar through cutout in cover. Reinstall Allen screws

through bar and into seats hidden support bracket. Leave screws
loose for now.

3. Reinstall the four 7/16" seat bracket mounting bolts and leave

loose for now.

4. Install the four 6 mm sissy bar bolts through bracket and into bar.

6 mm bolts should come with sissy bar. Torque the 7/16" bolts to
8 ft. lbs.

5. Mount backrest with supplied chrome 6 mm Allen bolts and

chrome washers. Tighten with a 4 mm Allen wrench.

Enjoy the comfort of your new Mustang Sissy Bar Pad!

Step 3 & 4

Step 5

These steps are guidelines to help you install your new Mustang product. If you need

further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30

or visit our website

For care and maintenance of our seats, please go to our website under

Ref. part #’s

See also other documents in the category Mustang Motorcycle Seats For motorcycles: