Mustang Motorcycle Seats Studded Pouch Tank Bib for Harley-Davidson XL Sportster with 3.25 - Manual

Mounting Suggestions:
Sportster with
2.25, 3.25, 3.3, and 4.5 gallon tanks
Tank Bibs
These steps are guidelines to help you install your new Mustang product. If you need
further assistance, please call us at 800-243-1392 or 860-582-9633, Monday through Fri-
day 9:00 - 5:30 Eastern or send an e-mail to
[email protected] or visit our
website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref: part #'s 93113, 93114, 93115, 93116, 93187, 93188, 93189, 93190, 93322, 93323,
93326, 93327, 93328, 93329
Mounting of Mustang Tank Bib:
Step 1 Remove seat from motorcycle.
Step 2 Remove gas cap from gas tank.
Step 3 Place tank bib on tank and align with hole for gas cap. Replace
gas cap to keep bib stable during installation of tie straps or cords.
Note: Bibs are supplied with either leather tie straps or elastic cords,
depending on bib style, gas tank size and model year.
Step 4 Pull tie straps (elastic cords) around both sides of and under
bottom edges of tank. Elastic cords stay in place; leather ties should be
threaded through loops at end of bib and tied in a knot.
Step 5 Attach lower end of bib to frame or gas tank mount using Velcro
tabs.
Step 6 Replace seat.
Enjoy the custom
look of your new
Mustang tank bib!
Elastic cords
Velcro tabs
Leather tie straps
Velcro tabs