Mustang Motorcycle Seats One-Piece Deluxe DayTripper Seat - Yamaha Roadliner - Manual

Mounting Suggestions
Yamaha Roadliner 2006-20
10 &
Stratoliner 2006-2011
One-Piece Seat
Tools Required:
• 10 mm socket
• 10 mm wrench
Hardware:
• Stock Rear Fender Bolt
Baseplate Features:
The one-piece, marine-grade fiberglass baseplate is a direct
replacement for the stock, two-piece seat. Rubber bumpers
are positioned to prevent the seat from touching the frame and
fender.
Stock Seat Removal Steps
1. Remove stock seat by inserting the ignition key into the left
side cover and turning it counterclockwise. This will unlock
the nose of the seat. Lift nose of the seat up a few inches,
then forward and off the motorcycle.
2. With solo seat removed, use a 10 mm socket to remove
the 2 rear seat mounting bolts from fender bracket.
3. Lift front of rear seat up then forward to remove.
Step 1
Step 2
Step 3