beautypg.com

Mustang Motorcycle Seats One-Piece DayTripper Seat Kawasaki Vulcan 1700 Classic User Manual

Page 2

background image

Installation Instructions for Mustang One-Piece Seat on

2009-2011 Kawasaki Vulcan 1700 Classic, Voyager, and Nomad

These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to

[email protected]

or visit our website

at

www.mustangseats.com.

For care and maintenance of our seats, please go to our website under

"Support".


Ref. part #’s 76600, 76601, 76602, 76603, 76604, 76605, 76606, 76607, 76608, 76609,
79630, 79631, 79632, 79633, 79634, 79635, 79636, 79637

Installation of Mustang one-piece seat



1. Note the two mounting points for the Mustang

seat; front nose tab, and key-latch bracket.










2. Rear bracket stays on fender but is not used.








3. Engage tab on front of Mustang seat onto
frame. Push center of seat down onto key-latch
bracket until it clicks into place