Mustang Motorcycle Seats Studded Set Back Passenger Backrest Honda Fury 2010-2013 - Manual (Page 2)

Installation Instructions for Mustang Two-Piece Seat
on 2010-2011 Honda Fury
Installation of Mustang Seat:
1. If installing only the Mustang solo (front) seat,
insert the solo seat’s nose tab into the frame
opening just behind the gas tank, above the shock
mount. Secure seat with two supplied chromed
Allen screws.
2. If also installing the matching Mustang rear seat,
secure back of front seat to fender using the two
supplied 6mm x 1” long hex head bolts with two
spool washers. Spool washers go on top of seat
mounting tabs, with two plastic washers placed
under mounting tabs against fender.
3. Align forks on front of Mustang rear seat with the
grooves in the spools; slide rear seat forward until
rear mounting tab aligns with hole in fender.
4. Secure rear seat to the fender using the supplied
Allen screw with the plastic washer under the
mounting tab against the fender.