Mustang Motorcycle Seats One-Piece DayTripper Seat - Harley-Davidson XL Sportster User Manual
Page 2
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website at
For care and maintenance of our seats, please go to our website under
Refers to part numbers: 75507, 75493, 75732, 75733, 75119, 75127, 75121, 75129,
75120, 75128, 75589, 75729, 75058, 75441, 75440, 75719, 76397, 75106, 75100,
75116, 75328, 75489, 75740, 75741
Enjoy the Comfort of your new Mustang Seat!
Mounting of Mustang Seat
1. Engage nose bracket onto the welded frame tab.
2. A firm downward chop to the nose of the seat will push the seat closer to the
fuel tank.
3. Align chrome rear tab with stock fender hole.
Note: On 1996-03 model, use the
supplied nylon washer between the chrome bracket and fender.
4. Push the seat down and secure in place with stock fender screw to complete
the installation process.
Stock Two-Piece Seat Removal Steps
1. Remove rear fender screw located behind the passenger seat and
set aside. The stock rear fender screw will be used to attach your
new Mustang One-Piece Seat.
2. Spread the foam between the solo and rear seat and loosen the
solo mounting screw.
3. Pull rear seat back and up.
4. Remove rear fender screw located at the rear of the solo seat.
5. Slide the solo seat back and up.
Mounting Suggestions: Sportster 1979-2003 One-Piece Seat continued from page 1