Mustang Motorcycle Seats Harley-Davidson FLHR - Manual (Page 2)

These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to [email protected] or visit our website at
www.mustangseats.com.
For care and maintenance of our seats, please go to our webste under "Support".
Refers to part #'s 76720, 76722, 76692, 76694, 79719, 79725, 79810, 79811
Mounting of Mustang Seat
1. Engage nose of seat, pushing seat as far forward as possible so that the
mounting studs in the fender are in the middle to back edge of the slotted
tabs.
2. A firm downward punch or chop to the nose of the seat will push the seat
closer to the chrome dash.
3. The seat is spring loaded so the rear tab will be above the fender
approximately 1” to 1 1/2”.
4. The supplied nylon washers go between the mounting tabs and the
fender.
5. Supplied Chrome Washers go between mounting tabs on seat and solo
mounting nuts.
6. Start one mounting nut to finger tight and then do second, secure both.
Enjoy the Comfort of your new Mustang Seat!