Ocean Optics XYZ Mapping Tables - Manual (Page 25)

000-10000-130-02-1209 17
Appendix A
Service and Maintenance
Though the Mapping Tables are mainly maintenance free, it may become necessary to lubricate the drive
screws of all axes with the provided special lubricant (approximately once per year).
x-axis:
Drive the x-axis to center-position and bring in the tube of the
injection to the drive screw and apply a little bit of lubricant to
the drive screw at both sides of the slide.
y-axis:
Put the mapping table in vertical position. At the Bottom is the
lubricant filler point.
Remove the label and bring in the injection tube.
Caution:
If the y-axis is running while lubricating the drive screw the tube
could be destroyed by the slide.