Ocean Optics CHEM2000 - Manual (Page 5)

About This Manual
Document Purpose and Intended Audience
This document provides information for installing and operating OOIChem software with the Maxwell
system.
Document Summary
Chapter Description
Chapter 1: Introduction Contains descriptive information about OOIChem software
and a quick start procedure.
Chapter 2: Using OOIChem
Software
Provides installation and configuration instructions for
OOIChem software.
Chapter 3: Experiment Tutorial Contains procedures for taking measurements in Absorbance,
Transmission, Relative Irradiance, Concentration, and Kinetics
experiments.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com . Select Technical → Operating Instructions, then choose the appropriate
document from the available drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
• Detailed instructions for the OOIBase32 Spectrometer Operating Software are located at:
http://www.oceanoptics.com/technical/ooibase32bit.pdf .
• Instructions for the OOIPS2000 Operating Software for the handheld PC are located at:
http://www.oceanoptics.com/products/ooips2000.asp .
Engineering-level documentation is located on our website at Technical → Engineering Docs.
You can also access operating instructions for Ocean Optics products from the Software and Technical
Resources CD that ships with the product.
105-00000-CHM-02-0405 PRELIMINARY DRAFT iii