Ocean Optics CHEM2000 - Manual (Page 18)

2: Using OOIChem Software
Exit
Select File | Exit from the menu to quit OOIChem. A message box appears asking you if you are sure you
want to exit the software.
Edit Menu Functions
Clear Spectrum Overlays
Select Edit | Clear Spectrum Overlays from the menu to remove static spectra from the graph.
Clear Kinetics Values
Select Edit | Clear Kinetics Values from the menu to clear both the kinetics values from the chart and to
clear the kinetics traces. A message box then appears, asking if you are sure you want to clear the kinetics
chart.
Autoscale X
The Autoscale X function automatically adjusts the horizontal scale of a current graph so the
entire horizontal spectrum fills the display area.
Autoscale Y
The Autoscale Y function automatically adjusts the vertical scale of a current graph so the entire vertical
spectrum fills the display area.
Show Kinetics Values
When setting up your kinetics experiment, you must first select Spectrometer | Spectrometer
Configuration from the menu and make sure that Spectrum & Kinetics is selected next to Graph and
chart display mode. Then configure your experiment by selecting Spectrometer | Kinetics
Configuration from the menu. When you select your wavelengths, the values from these wavelengths
will be displayed above the kinetics chart if this function is enabled.
12 PRELIMINARY DRAFT 105-00000-CHM-02-0405