Buyers MXR3 User Manual
Mounting instructions, Mxr3 motorcycle rack

Quality since 1946
Mounting Instructions
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
MXR3 Motorcycle Rack
WaRRanty
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transportation or labor performed on Buyers’ prod-
ucts will be allowed under this warranty.
3008230 Rev. A
Bill of Materials
-
-
1
Motorcycle Rack
-
-
3
Screw, 5/16-18 x 2"
-
-
6
Washer, 5/16"
-
-
3
Nut, 5/16" Lock
item
part no.
qty.
description
tools Required
5/16" Drill
3/16" Allen wrench
1/2" Wrench
1. Place the MXR3 rack centered against the
pickup bed and mark the three mounting hole loca-
tions for drilling. If the pickup bed has overhangs,
it may be necessary to mount the rack upside down
for a better fit.
CaUtIOn: If the pickup bed has a bed liner,
ensure that the rack is fully supported by the
pickup bed and not the bed liner.
2. Drill three 5/16" diameter holes in the pickup
bed in the locations marked in step 1.
3. Mount the MXR3 rack using the hardware
provided. Use a washer under the screw heads and
under the lock nuts.
CaUtIOn: Do not overtighten the hardware as it
may crush the rack frame tubing.
MXR3 Application