Buyers 85200 - Manual

Quality since 1946
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax (800) 841-8003 • buyersproducts.com
85200 Window Protector
Fig. 2
Fig. 1 Bracket, Top View
This Window Protector is designed to fit the following
truck models:
FORD F-250/350 Super Duty Reg. Cab 2000-Present,
Super Cab 1997-Present, Crew Cab 1997-Present
CHEVY/GMC Crew Cab includes HD models 2003-Present
DODGE Ram 1500 Reg. Cab 2002-Present, Quad Cab 2002-
Present
DODGE Ram 2500 Reg. Cab 2002-Present, Quad Cab 2003-
Present
DODGE Ram 3500 Reg. Cab 2003-Present, Quad Cab 2003-
Present
DODGE Ram Mega Cab 2006
IMpORtant: Check Owner’s Manual or contact your
truck manufacturer for all necessary pickup Box Reinforce-
ment Kits. always install recommended kits prior to Win-
dow protector installation. Failure to follow this procedure
may void truck’s warranty. never exceed recommended
maximum combined weight of equipment and cargo, rec-
ommended by truck’s manufacturer.
Installation Instructions, Warranty Information.
Place in vehicle glove box after installation.
—continued on other side
Installation Instructions
CAUTION
• Park your vehicle on flat, horizontal surface. Apply parking
brake or use wheel chocks to prevent accidental rolling.
• To keep debris out of your eyes always wear protective
eyewear.
• Tighten screws and nuts only when it is recommended by
these instructions.
• Check contents of box against part list to make sure all
components are included
tools Required
• 3/4" Open or Socket Wrench (2)
• Electric Drill
• 3/4" Drill Bit
1. Determine which hole on the bracket to be used. Mark the
appropriate hole for your vehicle on both brackets.
See Fig. 1
2. Apply adhesive cushions to brackets. Punch holes in cush-
ions according to marked holes in brackets.
See Fig. 2
3. Attach anchors to brackets using 1/2-13 x 2-1/2" screws.
Do not tighten screws. Make only 3-5 turns into anchor’s