Buyers 85300, -305, -310, -400, -405,-410 - Manual

Quality since 1946
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Installation Instructions
Van Security
Window Screens
Important!
Read Before Installing Screens!
Installation Tools
Protective eyewear
Drill with 5/16" hex driver socket
Wire cutters
Grinder
Fasteners
1/4" - 14-3/4" self drilling screws & 1/4" flat washers
Installation Instructions
1. Place screen over window frame and mark areas
that need fastening loops cut off or bent for best fit.
2. Some interior window trim may need to be
removed.
3. Allow for full window latch clearance before
fastening.
4. Grind any sharp edges smooth. Fasten screens
after aligning properly.
Window Latch
Clearance
1/4 -14 x 3/4''
Self Drilling
Screw
1/4'' Flat
Washer
Fasten
Loop
NOTE: If loop removal
is necessary for
clearance-use alternate
inner positions as needed
WARNING
Window screens can reduce the driver's ability to clearly
see roadways, vehicles, people and other objects through
the rear and side windows of the vehicle - which can cause
an accident. Driver must make all adjustments necessary for
maximum visibility. This includes, but not limited to: adjust-
ing mirror and seating positions.
CAUTION
Always wear protective eye wear when installing
screens to protect from debris
3009301 Rev. A