Buyers 85100 - Manual

Quality since 1946
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax (800) 841-8003 • buyersproducts.com
85100 Window Protector
Fig. 2
Fig. 1 Bracket, Top View
This Window Protector is designed to fit the following
truck models:
FORD F-150 all models 1997-Present
FORD F250/350 Super Duty Regular Cab 1997-1999
Chevy/ GMC 1500/2500 Regular Cab, Extended Cab and
Crew Cab 1999-Present
DODGe Ram 1500 Regular Cab 1997-2001
DODGe Ram 1500 Quad Cab 1997-2000
DODGe Ram 1500 Quad Cab 2001 (155” wheel base only)
DODGe Ram 2500 Regular Cab 1997-2001
IMPORTANT: Check Owner’s Manual or contact your
truck manufacturer for all necessary Pickup Box Reinforce-
ment Kits. Always install recommended kits prior to Win-
dow Protector installation. Failure to follow this procedure
may void truck’s warranty. Never exceed recommended
maximum combined weight of equipment and cargo, rec-
ommended by truck’s manufacturer.
Installation Instructions, Warranty Information.
Place in vehicle glove box after installation.
—continued on other side
Installation Instructions
CAUTION
• Park your vehicle on flat, horizontal surface. Apply parking
brake or use wheel chocks to prevent accidental rolling.
• To keep debris out of your eyes always wear protective
eyewear.
• Tighten screws and nuts only when it is recommended by
these instructions.
• Check contents of box against part list to make sure all
components are included
Tools Required
• 3/4" Open or Socket Wrench (2)
• Electric Drill
• 3/4" Drill Bit
1. Determine which hole on the bracket to be used. Mark the
appropriate hole for your vehicle on both brackets.
See Fig. 1
2. Apply adhesive cushions to brackets. Punch holes in cush-
ions according to marked holes in brackets.
See Fig. 2
3. Attach anchors to brackets using 1/2-13 x 1-1/2" screws.
Use 1/2-13 x 4" for Ford F-150 2004 new style. Do not tighten
screws. Make only 3-5 turns into anchor’s short side nut.
See Fig. 3