Buyers 1804055 - Manual

Quality since 1946
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Mounting Instructions
1804055 Bolt-On Receiver Tube
Fig. 1
3007812 Rev. A
Warranty
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transportation or labor performed on Buyers’ prod-
ucts will be allowed under this warranty.
Fig. 2
Capacity:
20,000 lbs Maximum Gross Trailer Weight
2,000 lbs Maximum Vertical Tongue Load
WarnInG: Do not exceed the hitch plate or
vehicle towing capacity. If you do not know
these towing capacities, contact the hitch plate
installer and/or vehicle upfitter for your hitch
plate and vehicle towing capacities.
Mounting Instructions:
1. The Bolt-On Receiver Tube mounts to a hitch
plate utilizing two positions of the adjustable pintle
hitch hole pattern. Mount the Bolt-on Receiver
Tube with the gusset located on the bottom.
2. Bolt the receiver tube weldment to the hitch
plate using four 1/2” grade 8 bolts, lock washers
and nuts. Torque the fasteners to 100 ft-lbs. You
may use Buyer’s Products bolt kit P/N 8520.
3.38
3.50
6.00
5.00
.50
6.44
" SQ. 2
Ш.66
Ш.53
1804055_CAT
3007812