Crown Audio IQ-PIP-USP2 - Manual (Page 7)

IQ-PIP-USP2
Page 13 IQ-PIP-USP2 Reference Manual
IQ-PIP-USP2
Page 12 IQ-PIP-USP2 Reference Manual
Figure 3.8 RJ-45 Output to Din Input.
Figure 3.7 RJ-45 Output to Barrier Block Input.
Figure 3.6 RJ-45 Mating Plug
The following examples show how to connect the IQ-PIP-USP2 to other IQ
components:
Figure 3.5 Standard Crown Bus
Wiring “Loops” from the Output to
the Input of each IQ Component (for
Hub-Style Crown Bus wiring, see
Section 5.2.1).
uses RJ-45 connectors that accept
standard RJ-45 plugs like the one
shown in Figure 3.6, allowing the
use of industry-standard straight-
thru type network cables. The top
RJ-45 connector is used for input/
output and the bottom RJ-45
connector is used for daisy output.
Figure 3.9 RJ-45 Input to Barrier Block Output.
Figure 3.10 RJ-45 Input to Din Output.