R&M Materials Handling MANUAL CHAIN HOISTS - Manual (Page 71)

RPT / RPTC INSTRUCTION MANUAL/EN/06.17.09
9/10
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2009) R&M Materials Handling, Inc. All rights reserved.
6 PART NUMBERS
Part numbers listed are for complete trolleys.
6.1 RPT Push Trolley
Table 5. RPT Push Trolley Part Numbers
Model Maximum Capacity
lbs. [kg]
Beam Flange Width Range
in [mm]
Part Number
RPT-250 550 [250] 2 – 7.88 [50 – 200] 52291758
RPT-500 1100 [500] 2 –7.88 [50 – 200] 52291759
7.40 – 12.20 [188 – 310] 52291760
RPT-1000 2200 [1000] 2.56 – 7.88 [65 – 200] 52291761
7.88 – 12.20 [200 – 310] 52291762
RPT-2000 4400 [2000] 3.46 – 7.88 [88 – 200] 52291763
7.40 – 12.20 [188 – 310] 52291764
RPT-3000 6600 [3000] 3.93 – 7.95 [100 – 202] 52296722
7.40 – 12.20 [188 – 310] 52296723
RPT-5000 11000 [5000] 4.5 – 7.95 [114 – 202] 52296724
7.40 – 12.20 [188 – 310] 52296725
6.2 RPTC Hand-Geared Trolley
Table 6. RPTC Hand-Geared Trolley Part Numbers
Model Maximum Capacity
lbs. [kg]
Beam Flange Width Range
in [mm]
Part Number
RPTC-1000 2200 [1000] 2.56 – 7.88 [65 – 200] 52296613
7.88 – 12.20 [200 – 310] 52296614
RPTC-2000 4400 [2000] 3.46 – 7.88 [88 – 200] 52296615
7.40 – 12.20 [188 – 310] 52296617
RPTC-3000 6600 [3000] 3.93 – 7.95 [100 – 202] 52296618
7.40 – 12.20 [188 – 310] 52296619
RPTC-5000 11000 [5000] 4.5 – 7.95 [114 – 202] 52296620
7.40 – 12.20 [188 – 310] 52296621
RPTC-10000 22000 [10000] 4.88 – 7.87 [124 – 200] 52305633
7.40 – 12.20 [188 – 310] 52305634
Note: Part number of the hand chain for RPTC Hand-geared trolley is 52292623. Trolley is
furnished with hand chain, and the chain drop, unless otherwise specified, is for a hoist with 10
ft [3 m] of lift.