R&M Materials Handling MANUAL CHAIN HOISTS - Manual (Page 46)

RLP I&M MANUAL/EN/07.20.10
2/18
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M MATERIALS
HANDLING, INC. . Copyright © (2010) R&M MATERIALS HANDLING, INC. All rights reserved.
m
CAUTION: Read the instructions supplied with the product before installation and
commissioning.
m
CAUTION: Keep the instructions in a safe place for future reference.
Before proceeding with the operation or maintenance of the equipment it is important that the operating, and
maintenance personnel read this bulletin carefully in order to ensure the safe and efficient use of the
equipment.
Also, it is strongly recommended that the personnel responsible for the operation, inspection, and servicing
of this hoist, read and follow the Safety Standard ASME B30.21-1999 (or current revised edition). This
standard covers Manually Lever Operated Hoists as promulgated by the American National Standards
Institute and is published by the American Society of Mechanical Engineers. Copies of this publication are
available from the Society at United Engineering Center, 345 East 47th St., New York, NY 10017.
If any instructions are unclear, contact the manufacturer or distributor of the equipment before attempting to
install or use the manual lever puller.
R&M MATERIALS HANDLING, INC.
4501 Gateway Boulevard
Springfield, OH 45502
General Telephone: 937 - 328-5100
Toll Free Telephone (US): 800 - 955-9967
General Fax: 937 - 325-5319
Parts Department Fax (US): 800 - 955-5162
Parts Dept. Fax (other): 937 - 328-5162
Website: www.rmhoist.com